Customer: Food Manufacturer Need/Application: Customer wanted a heated mix tank with batch metering capabilities that would fit into their elevator and be fully portable. Solution: The system included: Ampco pump, Xylem multi-stage pump, control panel build to our specifications, air actuated three way valve, electric heater to heat the glycol/water mixture, jacketed tank, Micro Motion meter and a Sharpe […]
This paint mixing and transfer skid was designed for a manufacturer of radiators that are used to cool large transformers. Our customer wanted to be able to efficiently mix paint and other chemicals to produce the protective outer coating that is applied on their radiators. Our engineered solution consisted of two Tuthill Global Gear pumps […]
Toothpastes, shampoos, sauces, our favorite beverages, and many other materials we use and consume everyday have one thing in common, they were at one time mixed with a sanitary mixer. This is no coincidence, a sanitary mixer not only improves the overall quality of a product, but they are an intricate part of process’ that […]
In several manufacturing processes for chemical, industrial, and process applications an industrial mixer is needed to blend or mix substances together. Industrial mixers often raise the value of the final product produced in a myriad of ways. They are an indispensable part of many industrial processes that have produced products or materials that are essential […]
One of our customers needed a solution to a 10-year-old mixing issue that was driving up operation costs in their facility. The process involves producing a water/polyvinyl acetate emulsion mix that is used as a bath for premoisturized fabric to be coated. The fabric coating requires an extremely consistent mix, and their existing equipment was […]
Just finished up repairing a Sharpe mixer to start off the week! The repair included replacing the bearings, seals, shaft and we finished it off with a fresh new paint job.
Increasing output and efficiency is a common goal for all manufacturers. Customers often come to Anderson Process looking for ways to improve their fluid handling applications. Our experienced Territory Managers are there every step of the way, from initial walk-thoughs and recommendations to full implementation. Here’s another production improvement designed and coordinated by the AP […]
This MixMor turbine mixer with mixing tank assembly was designed for a midwest chemical manufacturer. The manufacturer’s business was expanding, and they wanted a new mixer and tank to double their production rate. The assembly features a MixMor TC-20-L52 flange mounted turbine mixer with a TEFC Motor (20 HP, 1750 RPM, 3/60, 230/460 VOLT), gear […]
