Pictured is a ANSI pump assembly that an automotive supplier brought in due to a leaking seal. Luckily in this case, there were no major parts needed. A standard overhaul was done on the pump. All the common wear items, including new ball bearings (pump and motor), mechanical seal, gaskets, O-rings, a coupling insert were […]
An engineered coating manufacturer needed their Kerr 5500 Series Vertical Process Pump repaired. As seen in the pictures below, excessive scale buildup inside and outside of the pump’s wet end caused the pump to seize or completely lock up. The shaft unfortunately needed to be replaced due to wear in critical areas. After replacing the […]
A chemical manufacturer’s Kinney (Tuthill) 2-stage liquid ring vacuum pump’s seals were leaking prematurely due to hard water correlated issues at their facility. After exploring some different options with the customer to extend seal life, they opted for us to rebuild the pump to factory specifications. We replaced the wear parts (seals and bearings) and […]
A sign and banner manufacturer wanted their Travaini liquid ring vacuum pump system they purchased on Ebay overhauled. The system features a single stage, oil lubricated liquid ring pump that is used to pull vacuum through a router table to secure material for various projects. The number of usage hours on the system had reached […]
Pictured is a Split Case Pump that had obvious past repair issues. The pump was brought to Anderson by a customer that made rolled aluminum products. Among the chief issues, the impeller clearance and shaft sleeves were not set properly, which resulted in severe wear to the entire rotating assembly. As a result, the shaft […]
With so many options to choose from in today’s day and age, buying the right pump for your application can initially feel like an overwhelming task. A task that can cost you time and money if not approached correctly. Providing detailed and accurate information is essential to finding the best pump for your application. That […]
These Blackmer Gear G1-133 pump assemblies were built for an adhesives manufacturer for processing PVA adhesives (poly vinyl alcohol). They are made of stainless steel and have 4” flanges. An addition we provided was a stainless-steel guard around the stuffing box at the customer’s request for extra protection. We also welded risers on our standard […]
Pictured is a Blackmer Gear G1-55 pump that was used for pumping a starch-based adhesive used in the manufacturing process of corrugated cardboard. The customer brought the pump in for a leaking seal. The seal unfortunately failed after pressures climbed above the seal’s operating pressure. The triple lip style cartridge seals used in this application […]
